Ultimate Guide To Removing The Old Bathtub From Scratch • Success City

Improving the bathroom is a great investment for those who can make money. But for those on a tight budget, a simple bathtub replacement can refresh the bathroom look. Adding a bathtub can create a luxurious spa atmosphere for your bathroom. You can know about Bathtub Installation Dubai.

Installing a new bathtub is complicated and time-consuming. It is better to seek professional help for the job, but it can cost you a fortune. Those who are reluctant to spend money can refer to our detailed step-by-step guide on bathtub installation.

Before we install a bathtub, it is a good idea to review all types of units available in the market. Our easy-to-read guide will also provide the best buying tips when choosing your next tub.

Some types of bathtubs

Bathtubs come in a variety of choices depending on the material and style. Let's first look at the different materials used to make bathtubs.


Fiberglass is an economical option for bathtubs. They're lightweight, modern and versatile, but they don't make the perfect tub for getting wet. Fiberglass is unsafe and does not retain heat. Therefore, they are more suitable for quick baths. They are often coated with acrylic to make them extra shiny and easy to clean. This requires careful cleaning, and one should avoid using abrasive cleaners.

If durability is your number one concern. Avoid fiberglass tubs as they are less resistant to cracks, scratches and corrosion. Even they disappear quickly.


Acrylic is the most common material used to make bathtubs due to its lightweight and easy to install feature. Acrylic is naturally soft. Therefore, manufacturers often use fiberglass to harden acrylic vacuum sheets to increase durability. Acrylic tubs are available in a variety of shapes and styles, making them the most popular among buyers.

This is great for prominent bathroom sharing families because naturally acrylic materials are more resistant to corrosion and fading. It is additionally simple to clean and keep up.


Steel bathtubs are an economically viable option for those who do not want to spend too much. These units weigh less than cast iron bathtubs but don't look the same vintage. Another downside of steel bathtub is that there is noise when filling the tub. Compared to other materials, the steel bathtub has the lowest sales ratio.

Decent marble

Diverse marble tubs can attract more attention than other materials due to their availability in a wide range of other colors and natural look patterns. Although they cost more than the rest, they can enhance the overall look and feel of the bathroom.

Marble is different from other materials in that it provides a unique and vibrant appearance. However, a decent marble bathtub is heavier and more expensive to maintain. Polished marble is a cast product, so it allows buyers to customize it according to their needs. Furthermore, it is extremely durable due to its strong material.

Dispose of the old bathtub

One has to know that removing and installing a bathtub is hard work. At first glance, this may seem like a daunting task, but our simple guide will break it down into simple steps.

Ultimate Guide To Removing The Old Bathtub From Scratch • Success City

Required tools

  • Utility knife
  • Pliers
  • Hammer
  • Screwdriver
  • Strainer wrench
  • Personal protective equipment

Follow these steps to remove the existing tub.

Ready place

It is important to measure the space between the first tub, bathroom fixtures and the door. The measurement will give you an idea of ​​how you will pull the tub out the door. It will also tell us if any bathroom accessories such as a sink or toilet will get in the way when the tub is removed. In this case, remove the sink and toilet and cover the floor with plywood to avoid any damage.

Turn off the water

First turn off the water supply. Turn off the water cut-off valve in the bathroom. If there is no separate valve for the bathroom, then turn off the water supply for the whole house. Next, turn on the faucet on the lower part of your house to relieve the pressure in the lines.

Disconnect the drain

Use a screwdriver to separate the overflow cover plate. Next, remove the attached drain assembly and open the mounting bracket. Next, you need to disconnect the drain and remove the strainer. Remove the drain flange using appropriate tools such as a strainer wrench.

Separate waste and flow

Open the access panel as far as the waste and overflow unit is concerned. In most cases, it is either behind the tub or under it. The use of pliers disconnects the WW drain line where the overflow valve and drain meet. Not all related items are designed the same, so variations may occur. In this case, the tools are galvanized steel, then use a lubricant to loosen the joint. If they are cement plastic, you will have to cut them with a pipe. If the new tub fits the existing WO unit, it does not need to be removed from the bathtub.

Remove tub spots and tiles

Move the tub around to expose the attached nails and screws. It is recommended to remove the wall surface from a height of eight inches. Leave the faucet handles as is. In this case, if the faucet handle is within eight inches of height, remove it with a screwdriver.

Next, use drywall to cut the drywall. Also, take a flat PC bar to remove the tiles. Doing so will expose all the screws and nails that strengthen the tub. Use the tools to unscrew any bolts that anchor the tub. Now, repeatedly pull the tub one inch off the back wall.

If the tub is an old-style tub. It will be difficult to get it out. In this case, lift the tub from one corner and pull it out using the bar. Call for some muscle strength to straighten the tub and get it out of the bathroom.

Post a Comment